CLS63 ECU Tuning

CLS63 ECU Tuning

$585.00
Sale price  $585.00 Regular price  $1,025.00
Skip to product information
CLS63 ECU Tuning

W219 · M156

CLS63 ECU Tuning

Part # 5

The Mercedes CLS63 AMG is a stunning four-door coupe powered by the legendary naturally aspirated M156 6.2L V8. However, despite its aggressive styling and factory pedigree, conservative engine management leaves a significant amount of performance untapped. The MBH Motorsports Performance...

  • Chassis Mercedes-Benz CLS63 AMG (W219)
$585.00
Sale price  $585.00 Regular price  $1,025.00

Guaranteed fitment

  • W219 · M156

Will it fit your car?Not sure? Email us your VIN

  • Made in the USAPhoenix, Arizona
  • Pay over time4 payments with Shop Pay
  • 5-year warrantyFlowsport+ limited
Not sure about your car? Email us your VIN

On the dyno

What it puts down.

The gains listed for this part, measured at the wheels. Your numbers will move with the car, fuel and tune.

  • Listed gain
Listed gains · at the wheels
Horsepower gain 40 wheel horsepower gain
Torque gain 40 wheel torque gain
From this part’s specs: +40 whp · +40 wtqShows the listed range, not a dyno sheet.
CLS63 ECU Tuning
CLS63 ECU Tuning
$585.00

Fitment

Built for these cars

Swapped, or not listed? Email us your VIN
  • W219
    M156
    W219

Your car on the list? You're good to go.

The details

Specs & details

The Mercedes CLS63 AMG is a stunning four-door coupe powered by the legendary naturally aspirated M156 6.2L V8. However, despite its aggressive styling and factory pedigree, conservative engine management leaves a significant amount of performance untapped. The MBH Motorsports Performance ECU Tune is a comprehensive software recalibration designed to eliminate these restrictions, dramatically improving throttle response, drivability, and the raw output of your CLS63.

As a standalone modification, this advanced calibration delivers a highly noticeable increase of +40 horsepower and +40 ft-lbs of torque. However, when this tune is paired with MBH Motorsports Long Tube Headers, the M156 engine is allowed to breathe to its absolute limits—unlocking massive synergy and yielding staggering gains of +80 horsepower and +75 ft-lbs of torque over stock.

Please note: Exact performance results may vary based on environmental factors, ambient temperature, dyno type, fuel quality, and overall engine age.

Refined Power & Engine Reliability

Our M156 calibrations are meticulously developed to smooth out power delivery across the entire RPM band. By optimizing fuel mapping and ignition timing, we eliminate factory electronic throttle lag for immediate, crisp acceleration the moment you step on the gas. While aggressively increasing output, all critical OEM engine protection routines, thermal thresholds, and knock sensors remain fully active for total operational safety and long-term powertrain reliability.

Key Features:

  • Standalone Output Gains: Delivers reliable increases of +40 HP and +40 TQ on a completely stock vehicle.

  • Maximum Header Synergy: Custom-tailored to maximize exhaust scavenging and airflow velocity when paired with MBH Motorsports long tube headers, unlocking +80 HP and +75 TQ over stock.

  • Instant Throttle Response: Eliminates factory pedal dead zones for immediate acceleration and sharper driving dynamics.

  • Factory Safety Buffers Preserved: Retains all OEM ECU failsafes, thermal limiters, and knock monitoring parameters for complete peace of mind.

  • Top Speed Limiter Removal: Deactivates factory speed governors for unrestricted top-end capability on closed courses.

Compatibility:

  • Engine: Mercedes-AMG M156 6.2L V8 (Naturally Aspirated)

  • Chassis: Mercedes-Benz CLS63 AMG (W219)

Disclaimer: For off-road racing and competition use only. This product is not intended or legal for installation on registered, licensed vehicles operated on public roads or highways.

$585.00
Questions about this part?Email us your question or VIN.
Email us

Straight from the owners

Built, bolted, proven

Real cars. Real dyno sheets. Here's what owners say after the headers go on.

5.0 / 5

3 verified builds

Verified

Spools like a different car

Backpressure gone. Boost comes in a full 400rpm sooner and it pulls all the way to redline now. Fitment was dead-on — no massaging, no fighting the O2 bungs.

Marcus D.

Scottsdale, AZ · Mar 2026

W211 · E55
Verified

Welds are art

Dyno sheet doesn't lie. Cleaner welds than anything I've had under a car and the coating still looks new after a season of desert heat.

Tony R.

Dallas, TX · Feb 2026

W205 · C63 S
Verified

They actually answer the phone

Called about fitment on a swapped G-wagon and got a real person who knew the platform. Parts shipped next day.

Dave K.

Miami, FL · Jan 2026

W463 · G63

Ready for yours?

Before you order

Straight answers

The questions we get asked most.

Still not sure?

Email us your question or VIN and we'll confirm fitment before you order.

sales@mbhmotorsports.com

Will this fit my car?

It's built for W219 · M156. Pick your car in the fitment check at the top of this page to confirm. Not listed, or engine swapped? Email us your VIN and we'll confirm fitment before you order.

Where is it made?

Right here in the USA, in our Phoenix, Arizona shop.

Can I ask a question before I order?

Yes. Email us with your car and your question and we'll get back to you. If you're unsure about fitment, include your VIN.

Built for your W219.

CLS63 ECU Tuning · $585.00